Tools for Sale

Click to Browse Tools

Sales 800-524-9783

Mon-Fri. Sales 10am - 5pm Eastern Time or order on-line anytime.
Call with questions on application.

ATD Tools

Baum Tools

Calvan Tools

Rescue Bits

Time Sert

Win Tools

Thread Repair

Advice? 800-524-9783 x251

Impala SS Two Tone Leather – from Cimo & Cimo’s Upholstery

Chevrolet, Consumer, General Interest 3 Comments

Summary: Due partially to the economy with people finding it harder to get financing, demand is down for new and used cars. Right now some great deals on slightly used cars can be picked up, even at the new car dealers. This 5.3 V-8 2007 Impala SS loaded with 40,000 miles was picked up at a great price ($14,500) at Gordon Chevrolet in Tampa Florida. The leather was a little worn and honestly a little plain – too much grey was used on the interior. By getting this car at a great price, we budgeted enough money to snazz up the interior a bit. That’s where our local upholstery shop comes in. Cimo & Cimo’s Upholstery shop has a location in Tampa Florida, they will reupholster just about anything, from hot rods to yachts. Installing window film is a large part of their business too. Who in Florida would invest in a new leather interior for their car and not shade it from the sun? This article has before and after pictures of the plain grey and the two tone leather after it was installed.

Read the rest…

Rear Wiper Motor Repair – Chevy Blazer Problems

Auto Specialty Tools, DIY, How To Auto Repair, Tech/Mechanic 2 Comments

Summary: Rear wiper motors on many types of SUV’s and mini vans commonly fail. One reason they fail is due to infrequent use. Electric motors tend to work better when they are used often. Sometimes a rear wiper motor can be tapped lightly to make it work temporarily. This is a quick test (used a lot on Fords) that will help to verify there’s power present at the motor. The wiper motor may stop again before long, but knowing that the motor is getting battery voltage without having to take the trim panel off for testing is a definite plus. The vehicle featured in this car repair article is a Chevy, which doesn’t have the common Ford rear wiper problem. The 1999 S-10 Blazer hatch has been opened and closed many times over the years. This can cause the wiring from the body to the hatch to weaken over time much like breaking a wire hanger by bending it in the same position repeatedly.

Read the rest…

Misfire and Coolant Loss Dodge 4.7 – Possible Head Gasket

Auto Specialty Tools, Chry. 4.7 Problems, DIY, Head Gasket Repl., How To Auto Repair, Jeep, Tech/Mechanic 31 Comments
4.7_Head_Gasket_Job_1
Summary: Mopar 4.7 engines used in many Jeep and Dodge vehicles share a common problem. Misfires which are accompanied with coolant loss, rear heater not working properly and engine temperatures running a higher than normal range, could have a leaking head gasket. There’s a couple of simple ways to check for a blown head gasket, one is by using a block test kit, another way is to use a cooling system pressure tester and removing the spark plug in the misfiring cylinder.

Pacifica Lumbar Doesn’t Work – Auto Repair Blog

Consumer, DIY, How To Auto Repair 2 Comments
Summary: This automotive repair blog is on a common Chrysler Pacifica seat problem. The drivers lumbar support can fail in one of several ways besides having a bad switch. The motor can fail, the cable can strip or the mechanical flex plate may wear and come apart. The lumbar support mechanism can be changed easily by anyone who is somewhat mechanically inclined. Unlike in some other cars, the seat cover does NOT have to be removed, just the rear access cover taken off for access. This is done in the vehicle making the replacement an easy do-it yourself project.

Ford Spark Plug Blow Out Problems How to Repair

Auto Specialty Tools, Calvan Tools, Ford Problems, How To Auto Repair 2 Comments

Summary: Ford spark plug blowout repair is covered in this article for 4.6, 5.4 & 6.8 liter engines. There are different brand insert repairs available for this Ford spark plug problem, however they are not all as effective and long lasting as the solution we recommend. Many Ford dealers want to charge thousands to replace the cylinder heads, when our repair can be done in the vehicle for a fraction of the cost. We sell some competitive brands like Lisle and Helicoil, however the Horizon made Calvan 38900 (Mount.9200 same w/different labeling) is the best repair system on the market today. We’ve sold hundreds of these, saving Ford owners a ton of money in the process. In the following article we’ll explain why this should be the next and last repair purchased for this particular repair.

Read the rest…

Dodge Ram Low Air Flow from AC Vents

Air Conditioning, How To Auto Repair 295 Comments

 

© DenLorsTools.com Summary: This article is about Dodge Ram pick up trucks that have a common air-flow problem with the HVAC (Heating Ventilation & Air Conditioning) system. The problem causes little heat (or AC depending the time of the year) to flow through the vents. The blower fan can typically be heard with no abnormal sounds, although no air seems to be making it out of  the vents. We go over parts that need to be removed to gain access to replace a common failed component.

Read the rest…

Checking for Bent Valves – Broken Timing Belt

How To Auto Repair, Mechanics Tools 8 Comments

Cylnder_Leakage_Tester

© DenLorsTools.com Summary: This article is on how to check for bent valves. Valves get bent most often on vehicles that have had a timing belt break or a timing chain jump a sprocket. Interference engines can allow the valves to crash into the pistons when the timing belt breaks due to the engine’s timing being out of synchronization. Some cars are more prone to having valve damage when the timing is off. We cover some of the more common manufacturers that seem to suffer from bent valves more than others, from timing belt failure. We have some tips on how to check for bent valves with the cylinder head still on the vehicle. Tools that help in determining if there’s bent valves listed also.

Read the rest…

Champion 7989 One Piece Design Spark Plug – Ford 3V

Ford Problems, How To Auto Repair, Lisle Specialty Tools, What's New? 28 Comments

Champion 7989 spark plugs are a one piece design that eliminates separating (image courtesy of ModdedMustangs.com).

Summary: In this auto repair blog post, we provide information about an improved design spark plug for Ford 3 valve engines. The original equipment Ford Motorcraft spark plugs have became notorious for breaking when being removed.  One of our previous articles is on broken spark plug removal; but who wants to put the same bad design back in?  There was a huge need for a newly designed replacement spark plug that would work in place of Ford’s badly designed spark plug that has caused much expense and inconvenience for many Ford owners. This article is about that plug and has application information as well.

Read the rest…

Common Ford Problems and Specialty Tools

Auto Specialty Tools, Ford Problems, How To Auto Repair, Mechanics Tools 4 Comments

Ford_Edsel

Ford has had a long history of coming up with unique ideas – Edsel case in point.

Summary: In this auto repair blog we cover some of the most common Ford mechanical issues in late model Ford vehicles. Learn how a minor tune up could lead to a several thousand dollar repair. Some of the most notable problems are with spark plugs ejecting (and breaking) – EGR systems, transmission failures and keys getting stuck in the ignition. Along with common problems, auto mechanics need specialty tools in some cases to make repairs; we cover those too.

Read the rest…

Jump and Carry – Choosing the Best Booster Pack

Auto Shop Tools, jump-n-carry 3 Comments

Jump_and_Carry_Battery_Boosters

Summary: In this auto service article we review the Jump and Carry booster pack line-up. These booster packs (jump starters) are manufactured by Clore automotive, which is one of the largest jump box suppliers in the automotive service industry – we cover the reasons why they maintain their top position. Jump and Carry booster boxes are available in several different CCA’s (Cold Cranking Amps) ranges, which allows the auto professional to purchase the size unit that best fits their needs.

Read the rest…

« Previous Entries Next Entries »