Tools for Sale

Click to Browse Tools

Sales 800-524-9783

Mon-Fri. Sales 10am - 5pm Eastern Time or order on-line anytime.
Call with questions on application.

ATD Tools

Baum Tools

Calvan Tools

Rescue Bits

Time Sert

Win Tools

Thread Repair

Advice? 800-524-9783 x251

OTC Genisys Scan Tool Questions – Best Deal Now FAQ

9:20 am Auto Scan Tool
Genisys_3.0
OTC Genisys scan tool screen shot with 3.0 operating system booting up.

Jump straight to the best deal on an OTC Genisys EVO right now – OTC3869 Fall 2011. DenLors has many automotive tools for sale and we answer many questions everyday. The questions below were asked recently related to Genisys scan tools and I thought I would share my responses, in case it may help others when considering the purchase of a Genisys scan tool, accessories or European software updates. Keep in mind information on software and limited time deals are obviously time sensitive, so consider the date of this post. You may also be interested in a previous post – OTC

Genisys Still Hard to Beat.

Question: I’ve been looking at automotive scan tools recently. What is the best deal you have on a Genisys scan tool right now? 
 
Answer : The OTC 3484 is a factory refurbished scan tool that comes with 2007 Domestic and Asian software installed, also 08 Asian and Domestic software update coupons are included free right now. The OTC3484 has a red power button which is important to know because this means it has a faster processor than the models that have a grey button.
 
Question: I would like to have a software update that covers European autos for my Genisys, which software update should I purchase?

Answer: If you already have the Euro cables and an older Euro update like 2003, the OTC 3421-73  (2005 European update) is the most recent Euro update for the Genisys right now. If you don’t have the cables see the OTC 3421-74. But OTC says if you wait for a couple of months (til around January 2009) the new European software update will be available, possibly up to 2008, instead of 2005. It makes sense to wait if you can to take advantage of the extra coverage.

Question: I see a place at check out for a discount coupon. Do I get a discount when I buy a Genisys Scan Tool?

Answer: Yes, we offer discounts on purchases over $1,000, see the Discount Coupon info. Basically, you get 3% off (DLTSAVE3) on purchases between one to two thousand dollars and 4% (DLTSAVE4) of on purchases over two thousand dollar’s

Question: What’s my total going to be after sales tax and everything?

Answer: We only charge sales tax in if shipping within our state (Florida). So if you’re outside Florida there is no sales tax charged. Just the price of the tool, free shipping (over $199) and no sales tax.

Question: I’m ready to buy a Genisys for my shop. How much is shipping and how long before I can expect delivery?

Answer: Ground shipping is free. Usually delivery times range from 1 to 6 days. We ship from the closest stocking warehouse to our customer and email a tracking information link once it ships so you know when to expect it.

Question: Do you have a Genisys replacement battery pack and charger available?

Answer: Yes, the replacement battery pack for the Genisys is the OTC 239180 and the charger or transformer is an OTC 3421-04.
Please keep in mind that scan tools and software change from year to year, so  for the most current information on the Genisys be sure to read the comments below with links to the latest deals we have to offer. If you have any questions feel free to ask below (including stock checks). Thanks!
23 Responses
  1. Hassen :

    Date: December 18, 2008 @ 4:46 pm

    Do you sell a scan tool which can read the transmission fluid temp from a ford explorer?

  2. dennisb on the Genisys Scan Tool :

    Date: December 18, 2008 @ 4:48 pm

    Hassen, Thanks for your inquiry. The Genisys scan tool (which is the best buy in my opinion for the money) can access transmission data. I checked on a 2004 Explorer we have here and it does show transmission temperature.

  3. James :

    Date: January 16, 2009 @ 3:46 am

    I recently aquired an OTC genisys with pathfinder 2000 really cheap. Can I update it? It is like new. I am looking at Auto X-ray. Thanks

  4. dennisb - Auto Tool Sales :

    Date: January 16, 2009 @ 7:53 am

    James, the Genisys software can be upgraded or you may want to resell it and buy the Auto X-Ray you mentioned. Both are good scan tools, however if you want more access to different systems you may want to update the Genisys.

  5. Tom Huynh :

    Date: February 5, 2009 @ 12:28 am

    Regarding the European Update, Is possible to install the european update software to the scan tool without having the 2003 software already installed?
    Does the starter kit software unlocks the european functionality?

    I would only use the OBDII connection without any need for the other cables.

  6. dennisb on the European Software :

    Date: February 5, 2009 @ 1:09 pm

    Tom, you can upload the European software as long as the scan tool has 2.0 or 3.0 operating software. You are able to access vehicle enhanced data only if you have the vehicle specific cables though. The update wouldn’t really help unless you have these cables as well. Now you can access OBD generic codes with what you already have.

  7. rehan :

    Date: August 26, 2009 @ 1:00 pm

    I need a new update and cable, can, GM, Ford and Dodge and flash programing PCM VCM BCM TCM.

  8. dennisb - Auto Tool Sales :

    Date: August 26, 2009 @ 1:11 pm

    Rehan, Updates are available, I’m not sure your going to be able to flash with the Genisys though. You may want to call OTC and talk to tech support (Phone 800-533-6127) to find out more on the flashing capability. As far as I’m aware accessing is possible with most systems but not flashing.

  9. Tim :

    Date: September 23, 2009 @ 10:11 am

    I am looking at OTC Genisys scanners and your site has the 3484 with free 2008 software upgrade coupons. I want to be sure the coupons are still valid before purchasing as OTC said they are not honoring them when I called them to ask and they said to ask the seller of the item to check the dates on the coupons included to be sure.

  10. dennisb - Auto Tool Sales :

    Date: September 24, 2009 @ 6:55 am

    Tim, Thanks for the inquiry. We’ve been getting that question a lot. The coupons are good, the person that you talked to was misinformed. However, we are out of the 3484 with 07 loaded and coupons. The good news is that we have them in stock right now with Domestic / Asian with 08 ALREADY loaded! Supplies are limited but this is a great deal while they last.

  11. Dean :

    Date: March 2, 2010 @ 12:03 am

    I have a genisys system 1 and want to upgrade. I need a smart cable,system 3 or 4, 2008 or 2009 domestic upgrade. will my older programs still work on the newer system?

  12. Rainer Sturzebecher :

    Date: March 10, 2010 @ 3:32 pm

    Hi, I was looking into buying a low cost OTC genisys scan tool but I need a scan tool that can see live info on the pcm/bcm/airbag and so on.I also need it to be able to perform special functions that are some times needed. Do you have the appropriate tool that includes these features?

  13. dennisb - Auto Tool Sales :

    Date: March 10, 2010 @ 5:53 pm

    Rainer, The otc Genisys does provide data in many cases. It does sometimes depend on the vehicle however. It’s hard to get a scan tool to do EVERYTHING, without getting a factory scan tool for each make. Of course most shops cannot afford to do that. The Genisys provides many functions at an affordable price. If you have specific models and functions you are curious about the ORT technical hotline can be contacted at1-800-533-6127.

  14. Bill :

    Date: July 8, 2010 @ 3:45 pm

    We have the Genisys Scan Tool @ our shop and deal with alot of 97 – 01 Ford Crown Victorias. What do we need to do to unlock the misfire malfunction in the datastream program of the tool?

  15. dennisb - Auto Tool Sales :

    Date: July 8, 2010 @ 6:49 pm

    Bill, It’s not really locked, just limitations from the car’s system. You may be able to see misfires by looking into mode 6 – see a past post we did covering that.

    MODE 6 Blog

  16. Scott :

    Date: August 17, 2010 @ 10:15 am

    Hi I have the old Genisys scanner with the black power button. I was wondering if you have any software packages to upgrade it to the newer 3.0 version software, or is that even possible with that scanner? If it is possible, will I need to buy the new smart cord for the 3.0 version or will my old smart cord with the smart inserts work?

  17. dennisb - Auto Tool Sales :

    Date: August 17, 2010 @ 10:32 am

    Scott, 4.0 is the latest. 4.0 is also required for newer updates. The inserts may still work, however the added convenience (and coverage) of the new smart cable is well worth the upgrade. You may want to consider selling your old scan tool on craigslist or ebay and replace the entire unit with a brand new (not refurbished) Genisys. Right now we have one with 2009 Asian & Domestic AND a smart cable. This way you have a new battery and charger too. Use Coupon code DLTSAVE3 at checkout to get more savings (no sales tax charged outside Florida). We have these in stock today 8/17/2010 in 4 warehouses throughout the country for quicker ship times. See the link below for more info.

    Genisys Scan Tool for Sale

  18. Tom :

    Date: August 25, 2010 @ 8:58 am

    Hi I was wondering if the Latin American sotware will work on vehicles in the United States? Is there any differences in the sofware that you know of?

    Thanks!

  19. dennisb - Auto Tool Sales :

    Date: August 25, 2010 @ 9:57 am

    Tom,

    Only if the Latin American cars meet USA emission standards (OBDII). I doubt that they do. I recommend buying scan tools in your region since the cars and standards may vary greatly depending on what part of the world we are talking about.

    You may want to contact OTC for more information.

  20. Robyn :

    Date: October 15, 2010 @ 9:12 pm

    We have the red power button Genisys with 3.0 software can I buy the combo pack with 4.0 and upgrade?
    Thanks and have a SUPER day!

  21. dennisb - Auto Tool Sales :

    Date: October 16, 2010 @ 6:58 am

    Robyn, Right now, I would recommend getting a new Genisys with the 4.0 system, 2009 Asian and Domestic already loaded. The reason is because of the cost of the update currently compared to the deal we have going on a NEW Genisys. Just a little more money and you can get a brand new scan tool, already updated. new battery, charger, smart cable etc. Click the following link for the software update info and current pricing that you originally asked about. Software update.

    We may not always have the new 3696 Genisys at this great of a deal but at the moment we do. See the following link for more information on the best deal on the Genisys I’m referring to. Genisys 3696 Classic.
    Also remember we don’t charge sales tax outside of Florida at this time (unless something changes at some point) – We offer free shipping, you get a 1 year warranty directly from OTCtools.com and you can use a coupon code to get an additional 3% off at checkout – DLTSAVE3. If you decide to get the replacement Genisys, then you could either sell the older one you have, use it as a back up to access older cars or use it for OBDII code reading and clearing.

    Wait that’s not all! Right now the 2010 software is not out. So for a limited time we are including 2010 update Coupons for Domestic and Asian Software at no additional cost! Supplies are limited, so act quickly to take advantage of this great deal.

  22. chris macs auto repair :

    Date: November 8, 2010 @ 6:09 pm

    does the 3.0 relearn 04 dodge durango transmissions

  23. dennisb - Auto Tool Sales :

    Date: November 8, 2010 @ 8:04 pm

    Chris, 4.0 is the latest operating software. The Genisys does not have flash capability. If you are not talking about reprogramming, but an actual procedure, you may want to ask OTC’s Tech support on that specific function – their Phone number is 800-533-6127. I wish I could be of further assistance.

Comment Below, Please Unlock Caps

Tell us your thoughts or ask a question. For best results please provide relevant details like your vehicle's year, make, model, engine size, the problem and when it occurs etc. - Comments need to be approved before they are seen by everyone. Notice we don't post Spam. Comment below (*SPAM, ALL CAPS & unrelated comments will be deleted). Click the following to view Dennis' "about page" for info on his background in automotive repair.

Please note: Your comment will not be posted until it's approved. We appreciate and read all on topic, relevant comments. Please don't ask for repair manual info like torque specs, wiring diagrams and specific repair procedures. If quick assistance is needed with purchasing a tool or part, please visit our tool website DenLorsTools.com or call to place an order at 800-524-9783. *Note we don't offer repair advice on the phone.